How to Clean and Maintain an Epoxy Floor: A Guide for DFW Homes and Businesses

One of the best things about an epoxy floor is how little work it takes to keep it looking new. Whether it's a garage in Keller or a shop floor in Fort Worth, the routine is the same. Here's how to care for it.

Everyday care

• Sweep or dust mop often. Grit and sand are what dull a floor over time, so get them up before they get ground in.

• Mop with warm water and a mild, pH-neutral cleaner. A capful in a bucket is plenty. Skip soap-heavy cleaners that leave a film.

• Wipe up spills promptly. Oil, antifreeze, brake fluid and chemicals clean right up when they're fresh.

What to avoid

• Harsh acids, citrus or vinegar cleaners used full-strength

• Abrasive pads and wire brushes

• Dragging sharp metal across the floor; use a piece of plywood or furniture pads instead

Garage floors

Rinse off road grime and salt now and then, especially after trips out of state in winter. A squeegee pushes water out the door fast. Hot tires won't hurt a properly prepped floor with a polyaspartic topcoat.

Commercial and industrial floors

In restaurants, shops and warehouses, an auto-scrubber with a neutral cleaner keeps busy floors clean without wearing the finish. Set a regular schedule for high-traffic lanes and wash bays. Put walk-off mats at entrances to catch grit before it spreads.

When to call us

If you see peeling, deep gouges or areas worn through to the concrete, call or text Star Epoxy at 682-475-2088. We serve Fort Worth, Dallas and all of DFW, and estimates are free and on-site.